Din avgränsning ger 117 träffar.
-
2009:15 Improvement and Validation of Weld Residual Stress Modelling Procedure
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...
Innehållstyp: Publikationer -
2009:12 Evaluating safety-critical organizations – emphasis on the nuclear industry
The regulator identified a few years ago a need for a better understanding of and a deeper knowledge on methods for evaluating safety critical organisations. There is a need for solid assessment methods in the process of management of organisational changes as well as in continuously performed assessment of organisations such as nuclear power plants. A considerable body of literature exists...
Innehållstyp: Publikationer -
2009:13e 2009 assessment of radiation safety in the Swedish nuclear power plants
This report has been prepared by order of the Swedish government in accordance with the “Governmental directive for the financial year 2009 regarding the Swedish Radiation Safety Authority”. The Swedish Radiation Safety Authority has through its supervision ensured a comprehensive basis for this overall assessment of radiation safety. The overall conclusion is that the radiation safety,...
Innehållstyp: Publikationer -
2009:07 Dependency Analysis Guidance Nordic/German Working Group on Common Cause Failure analysis
Phase 2...
Innehållstyp: Publikationer -
2009:05 Survey on requirements for independent reviews and inspections of electrical and I&C equipment
This survey is a first step to support the work to develop the Swedish regulations in the area of independent review and inspection in the process supporting implementation of electrical equipment in nuclear power plants. The report consists of a summary of different regulations in the area and also an analysis of the differences between the electrical and mechanical field especially in the...
Innehållstyp: Publikationer -
SSM Report 2008:01 A combined deterministic and probabilistic procedure for safety assessment of components with cracks – Handbook
SSM has supported research work for the further development of a previously developed procedure/handbook (SKI Report 99:49) for assessment of detected cracks and tolerance for defect analysis. During the operative use of the handbook it was identified needs to update the deterministic part of the procedure and to introduce a new probabilistic flaw evaluation procedure. Another identified need...
Innehållstyp: Publikationer -
2017:34 Human capability to cope with unexpected events
Background In the light of the Fukushima accident, it stood clear that the challenge of the unexpected is of great importance to both regulators and licensees. For SSM, as for many other national regulators, there was a selfevident need to learn more about the capabilities and actions of people when the unexpected arises and conditions are potentially extreme. A task group was set up within...
Innehållstyp: Publikationer