Din avgränsning ger 234 träffar.
-
2021:02 On Water Induced Sensitization of Ni (Fe,Cr) alloys towards Stress Corrosion Cracking in LWR Piping from 1st Principles Modelling
SSM perspective Background In Swedish Light Water Reactors (LWR), stress corrosion cracking of reactor components and welds occurs from time to time. As the nuclear power plants are ageing, it is essential to study and further understand the mechanism for environmentally induced sensitization.
Innehållstyp: Publikationer -
2021:01 In situ NMR condition monitoring of cable insulations in Nuclear Power Plants
SSM perspective Background As the nuclear power plants are ageing, it is important to verify that every component installed can function safely in the intended environment. Cables are among the most common components in a nuclear power plant and are required to function during normal operation
Innehållstyp: Publikationer -
2020:16 Estimates ofJ-integral and COD for circumferential through wall cracks under global bending including the effect of pipe end restraint
SSM perspective Background Leak-before-break (LBB) piping assessments have shown that piping systems can withstand long through-wall cracks before pipe rupture is expected. This is somewhat because pipe ends are restrained. In LBB assessments analyses are often performed for a pipe segment
Innehållstyp: Publikationer -
2020:12 Assessment of the QT-COOL coolant channel module against the PBF RIA 1-2 experiment
SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to
Innehållstyp: Publikationer -
2020:13 Core data Research at Uppsala University
SSM perspective Background This project is to support a research group at Uppsala University in the research feld of nuclear data for applications. Nuclear data research is about measuring microscopic cross-sections and developing theoretical nuclear models to create evaluated nuclear data
Innehållstyp: Publikationer -
2020:11 Competency based assessments of Nuclear Power Plant controlroom operators
Experiences of development and first operational methodological and technical demonstrator application
Innehållstyp: Publikationer -
2020:08 Identifying radiologically important ESS-specific radionuclides and relevant detection methods
SSM perspective Background The European Spallation Source (ESS) facility is under construction in Lund, Sweden. High-energy protons will be accelerated in a linear accelerator and generate neutrons when hitting a rotating target of tungsten. This spallation process will also generate a wide
Innehållstyp: Publikationer -
2020:07 Fibre Clogging in Nuclear Power Plants
SSM perspective Background Emergency core cooling systems in boiling- and pressurized water reactors use strainers. Their purpose is to out foreign material suspended in the cooling water so this material does not reach the reactor. After the 1992 event at Barsebäck nuclear power plant
Innehållstyp: Publikationer -
2020:04 Recent Research on EMF and Health Risk, Fourteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2019
SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientific Council on electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the Authority with advice on assessing possible health risks.
Innehållstyp: Publikationer -
2020:02 Models for axial gas flow and mixing in LWR fuel rods
SSM perspective Background Fission gases inside a fuel rod plays an important role in the behaviour of the fuel, both during normal operation and during events and accidents. Fission gases are released from inside the fuel pellets to the gap between the pellet and the cladding tube and then flow
Innehållstyp: Publikationer