Publikationer

Din avgränsning ger 47 träffar.

Sortera på:

Relevans Datum
  • 2012:17 Technical Note, Corrosion of copper canister

    It is expected that the inflow of ground water to the deposition holes and tunnels in the Forsmark repository will be very slow. Thus, it might take some few hundred years up to thousand years before the deposition holes are filled with ground water and it might take 6000 years or more before the bentonite buffer is fully water saturated and pressurized. The copper canisters will therefore...

    Innehållstyp: Publikationer
  • 2012:15 Technical Note, A review of the mechanical integrity of the canister

    An introductory review of SR-Site has been conducted with respect to the mechanical integrity of the canister. The review is focused on the copper canister and the nodular cast iron insert. Review results show that a number of loads and loading scenarios for the copper canister has not been analysed by SKB. The importance of sufficient creep ductility of the copper material and sufficient...

    Innehållstyp: Publikationer
  • 2012:13 Technical Note, A review of the creep ductility of copper for nuclear waste canister application

    SKB has presented insufficient evidence to justify their position that the OFP copper has an adequate creep ductility during long term storage. Their large body of experiments only serves to prove that the creep ductility is sufficient for much shorter time spans than the intended storage times. There is a clear need for a credible theory of creep brittleness of OFP copper which will permit...

    Innehållstyp: Publikationer
  • 2012:10 Technical Note, Review of the Geomicrobiological Aspects of SKB’s Licence Application for a Spent Nuclear Fuel Repository in Forsmark, Sweden

    The Swedish Radiation Safety Authority (SSM) reviews the Swedish Nuclear Fuel Company’s (SKB) applications under the Act on Nuclear Activities (SFS 1984:3) for the construction and operation of a repository for spent nuclear fuel and for an encapsulation facility. As part of the review, SSM commissions consultants to carry out work in order to obtain information on specific issues. The...

    Innehållstyp: Publikationer
  • 2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository

    The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years.  The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics...

    Innehållstyp: Publikationer
  • 2012:08 Deterministic Assessment of Future Costs for Dismantling (FA)

    In this study a model for advanced deterministic cost calculation has been used to find a parametric value on the cost for dismantling of the FA-facility. The study gives good description of good practise to collect, test and utilise input data in a systematic way in order to make prudent cost estimates for any particular nuclear installation The Swedish Law stipulates that future expenses...

    Innehållstyp: Publikationer
  • 2012:03 The IAEA Integrated Regulatory Review Service Mission to Sweden in February 2012

    The Swedish Government decided on January 22, 2009 to mandate the Swedish Radiation Safety Authority, SSM, to apply for an international review of the Author-ity and its areas of supervision, an ‘IRRS’ (Integrated Regulatory Review Service) carried out by the International Atomic Energy Agency (IAEA). On February 25, 2009, SSM made a formal request to the IAEA for an IRRS in Sweden. The time...

    Innehållstyp: Publikationer