Publikationer

Din avgränsning ger 365 träffar.

• Nuclear Security, Safety and Non-Proliferation: Sweden's International Cooperation in 2019

  Since the early 1990s, Sweden has been engaged in international efforts to ensure that radioactive and nuclear materials, as well as facilities and installations, are kept safe and secure. When the Soviet Union collapsed in 1991 and 1992, it is likely that Sweden was the first country to...

  Innehållstyp: Publikationer

• 2020:08 Identifying radiologically important ESS-specific radionuclides and relevant detection methods

  SSM perspective Background The European Spallation Source (ESS) facility is under construction in Lund, Sweden. High-energy protons will be accelerated in a linear accelerator and generate neutrons when hitting a rotating target of tungsten. This spallation process will also generate a wide...

  Innehållstyp: Publikationer

• 2020:07 Fibre Clogging in Nuclear Power Plants

  SSM perspective Background Emergency core cooling systems in boiling- and pressurized water reactors use strainers. Their purpose is to  out foreign material suspended in the cooling water so this material does not reach the reactor. After the 1992 event at Barsebäck nuclear power plant...

  Innehållstyp: Publikationer

• 2020:05 General data in accordance with the requirements in Article 37 of the Euratom Treaty

  Decommissioning of the nuclear reactors Ringhals 1 and Ringhals 2 in Sweden...

  Innehållstyp: Publikationer

• 2020:04 Recent Research on EMF and Health Risk, Fourteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2019

  SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientific Council on electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the Authority with advice on assessing possible health risks.

  Innehållstyp: Publikationer

• 2020:02 Models for axial gas flow and mixing in LWR fuel rods

  SSM perspective Background Fission gases inside a fuel rod plays an important role in the behaviour of the fuel, both during normal operation and during events and accidents. Fission gases are released from inside the fuel pellets to the gap between the pellet and the cladding tube and then flow...

  Innehållstyp: Publikationer

• 2020:01 Sulphide-induced stress corrosion cracking and hydrogen absorption incopper exposed to sulphide and chloride containing deoxygenated water at 90°C

  SSM perspektiv Bakgrund Den metod som den svenska kärnkraftsindustrin planerar att tillämpa för att slutförvara använt kärnbränsle kallas för KBS-3 och bygger på tre skyddsbarriärer: kopparkapslar, bentonitbuffert och det svenska urberget. I den...

  Innehållstyp: Publikationer

• 2019:26 Analysis of trends in brain tumour incidence in Sweden

  SSM perspective Background In the past few years, a discussion has been ongoing in both the research community and the media as to whether exposure to radiowaves from the use of mobile phones has an impact on the incidence of brain tumours in the general population. Ever since the introduction...

  Innehållstyp: Publikationer

• 2019:27 Effect of residual stress on ductile fracture at low primary loads – Numerical study

  SSM perspective Background Present report is a continuation of earlier work reported in SSM2009:27 regarding an analysis strategy for fracture assessment of defects in ductile material and SSM2011:19 on the influence from residual stresses on crack initiation and ductile crack growth at high...

  Innehållstyp: Publikationer

• 2019:24 SSM's external experts' review of SKB's analysis of long-term safety of 1BMA (SFR)

  SSM perspective Background Fractures in the concrete barrier of the rock vault 1BMA in the final repository for low and intermediate level waste (SFR) have been observed. The Swedish Radiation Safety Authority (SSM) enforced Swedish Nuclear Fuel and Waste Management Company (SKB) to assess the...

  Innehållstyp: Publikationer