Din avgränsning ger 204 träffar.
-
2018:15 Review of Geochemical Data Utilisation in SR-Site Safety Assessment
The Swedish Radiation Safety Authority (SSM) reviews and follows associated research related to the Swedish Nuclear Fuel Company’s (SKB) work with establishing a repository for spent nuclear fuel and an encapsulation facility.
Innehållstyp: Publikationer -
2018:09 Recent Research on EMF and Health Risk, Twelfth report from SSM's Scientific Council on Electromagnetic Fields, 2017
Background The Swedish Radiation Safety Authority's (SSM) Scientific Council on Electromagnetic Fields monitors current research on potential health risks with a correlation to exposure to electromagnetic fields, and provides the Authority with advice on assessing possible health risks. The Council gives guidance when the Authority must give an opinion on policy matters when scientific testing...
Innehållstyp: Publikationer -
2018:08 Calculated radiological consequences of applying European clearance levels to scrap metal from the decommissioning of Swedish nuclear facilities
Background Many practices involving radioactive substances generate materials with potential or known radioactive contamination. Clearance of materials means a decision that such materials can be released from regulatory control and used or disposed of without restrictions from a radiation protection point of view. According to regulations issued by the SSM, such decisions must be based on...
Innehållstyp: Publikationer -
2018:01 Monte Carlo patient-specific pre-treatment QA system for volumetric modulated arc therapy
Background According to the Swedish Radiation Safety Authority's Regulations in Radiotherapy (SSMFS 2008:33) are Swedish clinics required to verify the individual dose to patients, prior the first time a new treatment is given. To fulfil this requirement, current clinics perform in-vivo dosimetry in three dimensional conformal radiation therapy (3DCRT), which means that the entrance of...
Innehållstyp: Publikationer -
2017:37 Non-Ionising Radiation in Swedish Health Care
Bakgrund Inom sjukvården används alltmera teknik som exponerar patienter för icke-joniserande strålning vid diagnostik och terapi. Ofta används sådan teknik som ett alternativ till och ibland i kombination med metoder som exponerar för joniserande strålning. Huvudsyftet med studien var att identifiera och beskriva hur icke-joniserande strålning används...
Innehållstyp: Publikationer -
2017:32 COMRAD – Comprehensive investigation of the performance of computed and digital radiography
Background Within the industry, there has long been a need to replace the traditional X-ray film and its handling. These both for economic and environmental considerations. Both computed radiography and digital radiography offer many advantages over the traditional use of x-ray with film. However, the transition from film-based radiography requires in-depth knowledge of the relationship...
Innehållstyp: Publikationer -
2017:29 Evaluation of the simulation software CIVA for qualification purpose
Background Modeling is an important tool within NDT, partly to develop and optimize testing technologies, but also within the Qualification Body’s activities to assess technical verifications and perform parameter studies. SSM has supported university research in the area for many years and, among other things, in the development of a software for ultrasound modeling. In addition, the...
Innehållstyp: Publikationer -
2017:25 Evaluation of weld fatigue reduction in austenitic stainless steel pipe components
Background The performed investigation is a continuation of the work performed in SSM 2015:38 where fatigue tests were performed on pressurized welded austenitic stainless steel piping components. The specimens were subjected to a realistic variable amplitude loading with mainly reversed bending deformation and particular focus on high cycle fatigue. The previous fatigue results were quite...
Innehållstyp: Publikationer -
2017:22 Effect of weld repairs on residual stresses in nickel base dissimilar metal welds
Background The driving force for crack growth near welds in nuclear application piping may arise from weld residual stresses. Experience from nondestructive examination show that cracks in dissimilar metal welds are often found near weld repairs. The repair welding may affect the residual stresses through e.g. increased tensile stresses and increased plastic straining on the surfaces of the...
Innehållstyp: Publikationer -
2017:20 Assessment of inertia effects on transient clad-to-coolant heat transfer and coolant flow under reactivity initiated accidents
In this report, simple hydrodynamic models are used for studying the effects of coolant inertia on fuel-to-coolant heat transfer and coolant flow under reactivity initiated accidents in light water reactors. The objective is to assess if the inertia effects are important enough to warrant modification of QT-COOL, a coolant channel module for two-phase flow that has recently been implemented as...
Innehållstyp: Publikationer