Din avgränsning ger 240 träffar.
-
2021:09 Mechanisms important for material modelling in weld residual stress analysis
SSM perspective Background The prediction of weld residual stresses (WRS) is very complex as many mechanisms and phenomena infuence the development of WRS during welding. For accurate prediction, the constitutive material models used are essential and must be able to describe the material...
Innehållstyp: Publikationer -
2021:08 Recent Research on EMF and Health Risk
SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientifc Council on Electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the authority with advice on assessing possible health risks.
Innehållstyp: Publikationer -
2021:06 Quality Assurance Review of the Swedish Nuclear Fuel and Waste Management Company’s LOT Experiment (Phase S2 and A3) at the Äspö Facility in Sweden
SSM perspective Background This report presents a quality assurance (QA) review of the work done by SKB to retrieve the S2 and A3 parcels from the Long term test of bufer material (the LOT experiment) at the Äspö Hard Rock Laboratory. Each LOT parcel comprises a heated copper tube surrounded...
Innehållstyp: Publikationer -
2021:05 Cladding tube rupture under LOCA: Data and models for rupture opening size
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that is currently being studied in several research projects is the risk of release of fragmented fuel into the primary coolant in case of an accident. This risk...
Innehållstyp: Publikationer -
2021:04 Calibration of models for cladding tube high-temperature creep and rupture in the FRAPTRAN-QT-1.5 program
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that is currently being studied in several research projects is the risk of release of fragmented fuel into the primary coolant in case of an accident. This risk...
Innehållstyp: Publikationer -
2021:03 Updated radiological risk assessment for the “Radon” type surface disposal facility in Chisinau, Moldova
SSM perspective Background Bilateral cooperation between Sweden and the Republic of Moldova in nuclear and radiological safety and security has been ongoing since 2010, focusing on activities aimed at strengthening the institutional capacity of the National Agency for Regulation of Nuclear and...
Innehållstyp: Publikationer -
2021:01 In situ NMR condition monitoring of cable insulations in Nuclear Power Plants
SSM perspective Background As the nuclear power plants are ageing, it is important to verify that every component installed can function safely in the intended environment. Cables are among the most common components in a nuclear power plant and are required to function during normal operation...
Innehållstyp: Publikationer -
2021:02 On Water Induced Sensitization of Ni (Fe,Cr) alloys towards Stress Corrosion Cracking in LWR Piping from 1st Principles Modelling
SSM perspective Background In Swedish Light Water Reactors (LWR), stress corrosion cracking of reactor components and welds occurs from time to time. As the nuclear power plants are ageing, it is essential to study and further understand the mechanism for environmentally induced sensitization.
Innehållstyp: Publikationer -
2020:16 Estimates ofJ-integral and COD for circumferential through wall cracks under global bending including the effect of pipe end restraint
SSM perspective Background Leak-before-break (LBB) piping assessments have shown that piping systems can withstand long through-wall cracks before pipe rupture is expected. This is somewhat because pipe ends are restrained. In LBB assessments analyses are often performed for a pipe segment...
Innehållstyp: Publikationer -
2020:12 Assessment of the QT-COOL coolant channel module against the PBF RIA 1-2 experiment
SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to...
Innehållstyp: Publikationer