Din avgränsning ger 719 träffar.
-
2021:19 Importance Sampling Time-Domain Random Walk (ISTIDRAW) Version 1.0 User Guide A Code for Radionuclide Transport in Pathway Networks
SSM perspective Background To support regulatory review of post-closure safety assessments of geological disposal systems it is of importance to possess regulatory independent modelling capacity. Typically, SSM’s independent modelling includes performing simple scoping calculations, utilizing the implementer’s own models with other equation solvers, or defining alternative conceptual...
Innehållstyp: Publikationer -
2021:14 Reliability, Feasibility and Significance of Measurements of Conductivity and Transmissivity of the Rock Mass for the Understanding of the Evolution of a Repository of Radioactive Waste
SSM perspective Background The conducted research was part of the international research project DECOVALEX 2019 (DEvelopment of COupled models and their VALidation against EXperiments). DECOVALEX 2019 consisted of seven different research projects called Task A to G. SSM were involved in Task G, which were composed of three different teams from Technical University of Liberec (TUL),...
Innehållstyp: Publikationer -
2021:13 SSM’s external experts’ review of SKB’s safety evaluation SE-SFL
SSM perspective Background In Sweden long-lived low- and intermediate level radioactive waste is planned to be disposed in a repository (SFL) in the Swedish crystalline rock at a depth around 500 m. The waste contains mainly the long-lived wastes from the operation and decommissioning of the Swedish nuclear reactor plants, as well as the long-lived wastes from early research in the Swedish...
Innehållstyp: Publikationer -
2021:10 Establishment and use of attention values in environmental fatigue assessments
SSM perspective Background As Swedish NPPs reach their original technical design life, re-assessment of the fatigue life of structural components is needed for safe long term operation (LTO). In these re-assessments one must consider that new knowledge has shown that environmental effects on fatigue life must be considered. One common method to verify the fatigue life of structural components...
Innehållstyp: Publikationer -
2021:09 Mechanisms important for material modelling in weld residual stress analysis
SSM perspective Background The prediction of weld residual stresses (WRS) is very complex as many mechanisms and phenomena influence the development of WRS during welding. For accurate prediction, the constitutive material models used are essential and must be able to describe the material response of the weldment constituents. For example, selection of a material model should only depend...
Innehållstyp: Publikationer -
2021:08 Recent Research on EMF and Health Risk
SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientifc Council on Electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the authority with advice on assessing possible health risks. The Council gives guidance when the authority must give an opinion on policy matters when...
Innehållstyp: Publikationer -
2021:06 Quality Assurance Review of the Swedish Nuclear Fuel and Waste Management Company’s LOT Experiment (Phase S2 and A3) at the Äspö Facility in Sweden
SSM perspective Background This report presents a quality assurance (QA) review of the work done by SKB to retrieve the S2 and A3 parcels from the Long term test of buffer material (the LOT experiment) at the Äspö Hard Rock Laboratory. Each LOT parcel comprises a heated copper tube surrounded by bentonite, with a number of copper coupons and various other test and monitoring instruments...
Innehållstyp: Publikationer -
2021:05 Cladding tube rupture under LOCA: Data and models for rupture opening size
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that is currently being studied in several research projects is the risk of release of fragmented fuel into the primary coolant in case of an accident. This risk depends on complex conditions were one is the possibility and size of a rupture of the fuel rod...
Innehållstyp: Publikationer -
2021:04 Calibration of models for cladding tube high-temperature creep and rupture in the FRAPTRAN-QT-1.5 program
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that is currently being studied in several research projects is the risk of release of fragmented fuel into the primary coolant in case of an accident. This risk depends on complex conditions where one is the possibility and size of a rupture of the fuel rod...
Innehållstyp: Publikationer -
2021:03 Updated radiological risk assessment for the “Radon” type surface disposal facility in Chisinau, Moldova
SSM perspective Background Bilateral cooperation between Sweden and the Republic of Moldova in nuclear and radiological safety and security has been ongoing since 2010, focusing on activities aimed at strengthening the institutional capacity of the National Agency for Regulation of Nuclear and Radiological Activities in Moldova (NARNRA) as well as infrastructure development in radioactive...
Innehållstyp: Publikationer
Gå till sida:
- Föregående sida
- Sida: 1
- Sida: 2
- Sida: 3
-
4 (nuvarande sida)
- Sida: 5
- Sida: 6
- Sida: 7
- …
- Sida: 71
- Sida: 72
- Nästa sida