Rapporter

Din avgränsning ger 10 träffar.

• 2013:30 Laser pointers and Eye injuries - An analysis of reported cases

  The safety limits that exist for human exposure of laser radiation are essential to reduce the risk of injuries. These values, however, give very little information on what tissue damages that may be expected at various elevated exposure levels. Similarly, the Swedish Radiation Protection...

  Innehållstyp: Publikationer

• 2013:29 Regulatory Approaches in Nuclear Power Supervision

  The objective of this follow-up study was to support SSM in further understanding regulatory approaches and how they can be combined as part of effective strategies. The survey was intended to assist SSM in identifying current standards, experiences, and practices in the regulation of nuclear...

  Innehållstyp: Publikationer

• 2013:28 Brine intrusion by upconing for a high-level nuclear waste repository at Forsmark. Scoping calculations

  The objective of this study is to evaluate the possibility of salt-water migration to the spent nuclear repository. This objective is motivated by the adverse impacts of water with too high salinity entering the repository and by the uncertainty of the relevant hydraulic and hydrogeochemical...

  Innehållstyp: Publikationer

• 2013:27 Numerical simulations of headed anchors break in reinforced and non-reinforced concrete structures

  The design codes for anchorage of equipment in concrete structures have been developed since the time the Swedish power plants were designed. Furthermore, the design basis has been updated and in some cases new mechanical loads have been added. As a consequence, it can be difficult for some...

  Innehållstyp: Publikationer

• 2013:24 Modelling of nuclear fuel cladding under loss-of-coolant accident conditions

  We present a unified model for calculation of zirconium alloy fuel cladding rupture during a postulated loss-of-coolant accident in light water reactors. The model treats the Zr alloy solid-to-solid phase transformation kinetics, cladding creep deformation, oxidation and rupture as a function...

  Innehållstyp: Publikationer

• 2013:19 Eighth report from SSM:s Scientific Council on Electromagnetic Fields

  The Swedish Radiation Safety Authority`s (SSM) scientific council monitors the current research situation and gives the authority advice on the assessment of risks, authorization and optimization within the area. The council gives guidance when the authority shall give an opinion on policy...

  Innehållstyp: Publikationer

• 2013:09 An Application of the Functional Resonance Analysis Method (FRAM) to Risk Assessment of Organisational Change

  The objective of this study was to demonstrate an alternative approach to risk assessment of organisational changes, based on the principles of resilience engineering. The approach in question was the Functional Resonance Analysis Method (FRAM). Whereas established approaches focus on risks...

  Innehållstyp: Publikationer

• 2013:07 Corrosion of copper in distilled water without molecular oxygen and the detection of produced hydrogen

  In this report, results are presented for copper which has been exposed to pure anoxic water in the temperature interval of 21 °C to 55 °C up to a total of 19 000 hours. Characterisations of copper surfaces after exposure have been performed ex-situ, meaning after termination of the experiment...

  Innehållstyp: Publikationer

• 2013:04 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 18

  The program executed in Stage 18 consists of the following three parts: Application of CoreSim with a two-dimensional model of vibrating fuel assemblies, for the calculation of ex-core detector noise throughout a fuel cycle; An investigation of the neutron noise, induced by propagating...

  Innehållstyp: Publikationer

• 2013:01 Validation of Weld Residual Stress Modeling in the NRC International Round Robin Study

  Weld residual stresses (WRS) have a large influence on the behavior of cracks growing under normal operation loads and on the leakage flow from a through-wall crack. Accurate prediction on weld residual stresses is important to make proper decisions when cracks in weld joints are detected.

  Innehållstyp: Publikationer