Din avgränsning ger 378 träffar.
-
2013:14 Approaches used for Clearance of Lands from Nuclear Facilities among Several Countries – Evaluation for Regulatory Input
SSM has recently established new regulations for clearance of materials, rooms, buildings and land (SSMFS 2011:2). The regulations specify that license holders for practices involving ionising radiation shall take measures after the cessation of the practice to achieve clearance of rooms, buildings and land. The regulations state nuclide specific clearance levels in becquerel per m2 for rooms...
Innehållstyp: Publikationer -
2013:13 Review of Dismantling Costs - Nuclear Installations
In this study three reviews of cost assessments for some smaller nuclear installations are presented for which nuclear waste liabilities shall be accrued according to the Financing Act (Lag (2006:647) om finasiella åtgärder för hanteringen av restprodukter från kärnteknisk verksamhet). It is expected that these reviews will contribute to develop premium quality assessments...
Innehållstyp: Publikationer -
2013:10 Qualification of Electrical Equipment in Nuclear Power Plants - Management of ageing
The purpose of this report is to describe programs and tools for assessment of accomplished and documented qualification with respect to ageing of electrical equipment and for development of complimentary ageing management programs. In addition to description of complete programs for management of ageing, tools for validation of the status with regard to ageing of installed (“old”) equipment...
Innehållstyp: Publikationer -
2013:09 An Application of the Functional Resonance Analysis Method (FRAM) to Risk Assessment of Organisational Change
The objective of this study was to demonstrate an alternative approach to risk assessment of organisational changes, based on the principles of resilience engineering. The approach in question was the Functional Resonance Analysis Method (FRAM). Whereas established approaches focus on risks coming from failure or malfunctioning of components, alone or in combination, resilience engineering...
Innehållstyp: Publikationer -
2013:08 Licensing of safety critical software for nuclear reactors
– Common position of seven European nuclear regulators and authorised technical support organisations...
Innehållstyp: Publikationer -
2013:07 Corrosion of copper in distilled water without molecular oxygen and the detection of produced hydrogen
In this report, results are presented for copper which has been exposed to pure anoxic water in the temperature interval of 21 °C to 55 °C up to a total of 19 000 hours. Characterisations of copper surfaces after exposure have been performed ex-situ, meaning after termination of the experiment and exposing the specimen to normal atmospheric environment. Ideally characterisation of surfaces...
Innehållstyp: Publikationer -
2013:06 The sixth round of implementation according to PARCOM recommendation 91/4 – Report from Sweden
According to the PARCOM Recommendation 91/4 contracting parties shall, in accordance with the guidelines annexed to this recommendation, every four years present a statement on progress made in applying best available technology (BAT) in order to minimise and, as appropriate, eliminate any pollution caused by radioactive discharges from all nuclear industries, including research reactors and...
Innehållstyp: Publikationer -
2013:04 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 18
The program executed in Stage 18 consists of the following three parts: Application of CoreSim with a two-dimensional model of vibrating fuel assemblies, for the calculation of ex-core detector noise throughout a fuel cycle; An investigation of the neutron noise, induced by propagating perturbations, in various thermal and fast reactor systems, in two-group theory; A consistent derivation of...
Innehållstyp: Publikationer -
2013:01 Validation of Weld Residual Stress Modeling in the NRC International Round Robin Study
Weld residual stresses (WRS) have a large influence on the behavior of cracks growing under normal operation loads and on the leakage flow from a through-wall crack. Accurate prediction on weld residual stresses is important to make proper decisions when cracks in weld joints are detected. During the latest years, there has been a strong development in both analytical procedures to...
Innehållstyp: Publikationer -
2012:71 Identification of Brittle Deformation Zones and Weakness Zones
In preparation for the review of Swedish Nuclear Fuel and Waste Management Company’s (SKB) license application for disposal of spent nuclear fuel, Swedish Radiation Safety Authority (SSM) is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock...
Innehållstyp: Publikationer