Sök

Din avgränsning ger 80 träffar.

Sortera på:

Relevans Datum
  • 2012:22 A dosimetric intercomparison between the radiation therapy clinics in Sweden

    In general the study showed a good agreement between the results from the audit team and the local team. The examination of the reference dosimetry showed an excellent agreement between the absorbed dose determined by the audit team and the local team. The spread of the results among the Swedish radiotherapy departments was much lower as compared to similar studies conducted in other...

    Innehållstyp: Publikationer
  • 2017:14 Kriterier för klinisk revision av strålbehandling

    utföras enligt nationella förfaranden. Strålsäkerhetsmyndigheten införlivade detta krav i föreskriften SSMFS 2008:35 om allmänna skyldigheter vid medicinsk och odontologisk verksamhet med joniserande strålning ... att en nationell organisation skapas enligt de riktlinjer som föreslagits tidigare i rapporten SSM 2012:04 ”Förslag till nationell modell för klinisk revision av strålbehandlingsverksamhet”. I rapporten...

    Innehållstyp: Publikationer
  • 2021:18 Strålsäkerhetsmyndighetens mobila mätningar av radiovågor under åren 2012-2020

    generella radiovågsexponeringen i samhället. Strålsäkerhetsmyndigheten (SSM) utvecklade därför under år 2012 ett mobilt mätsystem som bättre kan uppskatta radiovågors styrka i olika utomhusmiljöer. Systemet ... högre i tätorter än i glesbygden och att samtliga mätvärden ligger under gällande referensvärden (SSMFS 2008:18). Vanligt förekommande medelvärden i storstäder är 3-7 mW/m2. Det högsta värdet som uppmätts...

    Innehållstyp: Publikationer
  • 2007:41 Dependency Analysis Guidence, Nordic/German Working Group on Common cause Failure analysis Phaase 1 project report: Comparison and application to test cases

    The report “Nordic/German Working Group on Common cause Failure analysis. Phase 1 project report: Comparisons and application to test cases” presents a common attempt by the authorities and the utilities ... component impairments, time differences and shared cause assessment. Following the conclusions of phase 1 it was decided to proceed with a second phase of the project. The objectives for phase 2 wibe to establish...

    Innehållstyp: Publikationer
  • 2018:18 Procedure for Safety Assessment of Components with Defects

    growth and stress corrosion crack growth for nuclear applications. Objective The SSM regulations SSMFS 2008:13, containing rules for mechanical components in certain nuclear facilities, allows for further ... from Residual Stresses on Crack Initiation and Ductile Crack Growth at High Primary Loads. Research 2012:07, Implementation of the Master Curve Method in ProSACC. Research 2013:01, Validation of Weld Residual...

    Innehållstyp: Publikationer
  • 2010:42 Using the EPRI Risk-Informed ISI Methodology on Piping Systems in Forsmark 3

    In the SSM regulation SSMFS 2008:13, it is stated that the selection of locations for inspection of mechanical components shall be based upon the risk for core damage or the risk of release of radioactive...

    Innehållstyp: Publikationer
  • 2016:35 Säkerhetsvärdering mot plastisk kollaps vid skadetålighetsanalyser

    Bakgrund Proceduren som används för brottmekanisk analys av defekter och inspektionsintervall för komponenter i svenska kärntekniska anläggningar utgår från den brittiska R6-metoden men är vidareutvecklad ... för att göra säkerhetsbedömningar av komponenter med sprickor som ett led att uppfylla 2 kap. 6 §, SSMFS 2008:13 när skador påträffas. Petter von Unge SSM Svenska...

    Innehållstyp: Publikationer
  • 2017:03 Inverkan av inre tryck på sprickytan vid gränslastanalyser

    Bakgrund ProSACC är en programvara som med dokumenterat gott resultat kan utföra brottmekaniska beräkningar på ... för att göra säkerhetsbedömningar av komponenter med sprickor som ett led att uppfylla 2 kap. 6 § SSMFS 2008:13 när skador påträffas. Petter von Unge SSM Svenska...

    Innehållstyp: Publikationer
  • 2018:01 Monte Carlo patient-specific pre-treatment QA system for volumetric modulated arc therapy

    Background According to the Swedish Radiation Safety Authority's Regulations in Radiotherapy (SSMFS 2008:33) are Swedish clinics required to verify the individual dose to patients, prior the first time...

    Innehållstyp: Publikationer
  • 2017:15 Radionuclide release rates associated with bounding cases featuring relatively early canister failures in a spent fuel repository

    canisters fail during different time spans after closure of the repository (e.g. from 1 to 300, 1 to 1 000, 1 to 6 000 and 1 to 100 000 years) using the earlier developed isostatic load model. The investigation ... extreme scenarios resulted in doses less than the typical background radiation in Sweden (approximately 1 mSv/yr). The results can be used by simply scaling the results of the bounding case calculations to...

    Innehållstyp: Publikationer