Sök

Din avgränsning ger 724 träffar.

• 2011:16 Modelling of ultrasonic testing of cracks in cladding

  During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.

  Innehållstyp: Publikationer

• 2014:19 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 5, 6 and 7

  The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...

  Innehållstyp: Publikationer

• 2014:56 Seismic design and analysis of safety-related nuclear structures in Sweden

  The report presents the historical development of the seismic design for the U.S., France and Sweden with special focus on issues related to severe earthquakes beyond the design basis as well as important aspects concerning the design basis ground motions for the Swedish nuclear facilities. The report provides recommendations on a revised model for seismic hazard assessments, on minimum...

  Innehållstyp: Publikationer

• 2015:07 TEM-lamella lift-out from the crack tip region of Alloy 600 for high resolution electron microscopy examination

  This report contributes to the development of a method for high-quality TEM lamella preparation from crack tip regions of nuclear materials. A standard compact tension (CT) specimen of Alloy 600 previously tested for stress corrosion crack growth in simulated PWR primary water was used to demonstrate the benefit of the proposed method. This report describes the procedure for cutting the CT...

  Innehållstyp: Publikationer

• 2015:28 Utvärdering av materialdata för befintliga betongkonstruktioner - med inriktning på verifiering av förankringar vid kärntekniska anläggningar

  Bakgrund I de Svenska kärnkraftverken finns ett stort antal fästplattor som är ingjutna alternativt eftermonterade. Fästplattan består av en förankringsplatta med tillhörande betonginfästning. Kapaciteten för flera av de viktigare brottmoderna för betonginfästningar styrs av hållfastheten hos omgivande betong. Betongens hållfasthet...

  Innehållstyp: Publikationer

• 2014:48 Technical Note, Independent assessment of groundwater sulphide content in the long-te

  Groundwater sulphide content is a key factor in the determination of canister lifetimes because of its role in corrosion of copper. SKB has based the canister lifetime analysis on a distribution of measured sulphide concentrations which are assumed to apply throughout the long-term analysis period. The distribution is based on expert judgement in the selection of samples that are regarded as...

  Innehållstyp: Publikationer

• 2014:12 Granskning och utvärdering av SKB:sredovisning av Fud-program 2013

  Enligt förordningen (1984:14) om kärnteknisk verksamhet (kärnteknikförordningen) ska Strålsäkerhetsmyndigheten (SSM) granska och utvärdera det program för forskning, utveckling och demonstration med mera (Fud-program) som reaktorinnehavarna enligt lagen (1984:3) om kärnteknisk verksamhet (kärntekniklagen) ska upprätta. Svensk Kärnbränslehantering...

  Innehållstyp: Publikationer

• 2015:24 Dimensionering av nukleära byggnadskonstruktioner (DNB)

  Strålsäkerhetsmyndigheten (SSM) och de svenska tillståndshavarna har tidigare i ett samfinansierat forskningsprojekt tagit fram anvisningar för dimensionering av nukleära byggnadskonstruktioner, DNB. Rapporten som är baserad på Eurokoderna publicerades som SSM rapport 2014:06 För att ytterligare förbättra DNB och för att säkerställa...

  Innehållstyp: Publikationer

• 2015:08 Technical Note, Rheological properties of the Bentonite Buffer

  Objectives of the project The general objective of the project is to provide review comments on SKB’s postclosure safety analysis, SR-Site, for the proposed repository at Forsmark. This technical note reviews SKB:s reporting of the rheological and geomechanical properties of buffer bentonite, both at high and low densities. Göran Sällfors, GeoForce AB, Göteborg SSM English Objectives of...

  Innehållstyp: Publikationer

• 2010:24 On Cost Estimate for Decommissioning of one Isotope Central

  The present generation has the responsibility to ensure and guarantee that sufficient financial resources are accrued into the Swedish Nuclear Waste Fund to cover all future costs. Thus, the next generation, as well as any succeeding generations, will have the financial resources required in order to undertake the necessary measures, in an appropriate manner, for the decommissioning and...

  Innehållstyp: Publikationer