Sök

Din avgränsning ger 400 träffar.

Sortera på:

Relevans Datum
  • 2023:07 General data in accordance with the requirements in Article 37 of the Euratom Treaty

    (Clab) on the Simpevarp Peninsula in Oskarshamn. The report follows the guideline set out in Annex I on the recommendation for applying Article 37 of the Euratom Treaty (2010/635/Euratom). The report shows ... would result in measurable dose levels in other Member States. According to the guideline in Annex I, no reporting of effective dose is required in other Member States provided that reporting is provided...

    Innehållstyp: Publikationer
  • 2016:37 PARTRIDGE project: Review and evaluation of the probabilistic fracture mechanics code PRO-LOCA

    be investigated further. Leak rate detection is a powerful way to detect leaks before a pipe break, i.e. the tendency for LBB (Leak Before Break) in the studied cases is quite strong. If a reliable leak ... detection system is implemented in a pipe system, the only way a break can occur is if the stress state (i.e. system loads and weld residual stresses) are distributed in a way that an initiated circumferential...

    Innehållstyp: Publikationer
  • 2012:35 Technical Note, Review of SKB’s Code Documentation and QA for the SR-Site Safety Assessment

    MSR. SKB used 22 codes in developing its safety case in SR-Site. The MSR addresses three categories: (i) commercial codes: ABAQUS, CODE_BRIGHT, ConnectFlow, Ecolego, ERICA Tool, MATLAB, MIKE SHE, PHAST, PHREEQC ... SKB used 22 codes in developing its safety case in SR-Site.  The MSR addresses three categories:  (i) commercial codes:  ABAQUS, CODE_BRIGHT, ConnectFlow, Ecolego, ERICA Tool, MATLAB, MIKE SHE, PHAST,...

    Innehållstyp: Publikationer
  • 2014:43 Technical Note, Workshop on general corrosion of copper

    factors, most notably from the assumed application of criteria for the rejection of deposition-holes (i.e., rejecting holes with high groundwater inflow rates from fractures). Low erosion rates would be another ... factors, most notably from the assumed application of criteria for the rejection of deposition-holes (i.e., rejecting holes with high groundwater inflow rates from fractures).  Low erosion rates would be...

    Innehållstyp: Publikationer
  • 2020:07 Fibre Clogging in Nuclear Power Plants

    regimes based on LFibre/DOpen, and LFibre/SOpen. Most effective was the retention of fibres in regime I. Surprisingly, also screens in regime II, which hole size DOpen is larger than the fibre length LFibre ... coverage rate was sensitive on the hole spacing SOpen. Findings per regime is summarized as: Regime I, small holes and small spacing, retained fibres that were longer than the diameter or width of the holes...

    Innehållstyp: Publikationer
  • 2013:35 Technical Note, Rock Mechanics – Confidence of SKB’s models for predicting the occurrence of a damage zone around the excavations – Main Review Phase

    This assignment, performed at Southwest Research Institute, focusses on evaluating SKB’s assessment of potential occurrence of damaged rock zones (also referred to as excavation-damaged zone or EDZ) ... damage due to spalling by modifying the flow pathways at the wall of the deposition hole. Goodluck I. Ofoegbu and Kevin J. Smart SSM English This assignment, performed at Southwest Research Institute,...

    Innehållstyp: Publikationer
  • 1996:70 Risks from Nuclear Waste

    itself to risk, but must be connected to exposure, either external or internal, leading to a dose risk , i.e, a health detriment, which is commonly expressed in terms of cancer induction rate. Dose-effect relations ... itself to risk, but must be connected to exposure, either external or internal, leading to a dose risk , i.e, a health detriment, which is commonly expressed in terms of cancer induction rate. Dose-effect relations...

    Innehållstyp: Publikationer
  • 2019:02 Research within technical safeguard at Chalmers University of Technology during 2016-2017

    personnel during 2016-06-30 – 2017-12-31 with a research grant, Dnr SSM2016-662 from SSM, with undersigned (I.P.) as the project leader. The research was concentrated on two main subjects: Developing a method for ... personnel during 2016-06-30 – 2017-12-31 with a research grant, Dnr SSM2016-662 from SSM, with undersigned (I.P.) as the project leader. The research was concentrated on two main subjects: Developing a method for...

    Innehållstyp: Publikationer
  • 2016:25 Licensing of safety critical software for nuclear reactors

    cases and demonstrations of safety of software based systems; as guidance for manufacturers and major I&C suppliers on the international market. The SSM report 2016:25 has been updated with a new revision ... cases and demonstrations of safety of software based systems; as guidance for manufacturers and major I&C suppliers on the international market. The SSM report 2016:25 has been updated with a new revision...

    Innehållstyp: Publikationer
  • 2018:19 Licensing of safety critical software for nuclear reactors

    Common position of international nuclear ... cases and demonstrations of safety of software based systems; – as guidance for manufacturers and major I&C suppliers on the international market. The members of the Task Force on Safety Critical Software. ... cases and demonstrations of safety of software based systems; – as guidance for manufacturers and major I&C suppliers on the international market.

    Innehållstyp: Publikationer