Din avgränsning ger 195 träffar.
-
2012:17 Technical Note, Corrosion of copper canister
It is expected that the inflow of ground water to the deposition holes and tunnels in the Forsmark repository will be very slow. Thus, it might take some few hundred years up to thousand years before the deposition holes are filled with ground water and it might take 6000 years or more before the bentonite buffer is fully water saturated and pressurized. The copper canisters will therefore...
Innehållstyp: Publikationer -
SKI Report 2008:01 Reliability Data for piping Components in Nordic Nuclear Poer Plants "R-Book" Project Phase 1
Atomic Energy Research Institute, and the Japan Nuclear Energy Safety Organization. SKI Report 2008:1 describes the methods and techniques that are proposed for the derivation of piping reliability parameters ... Atomic Energy Research Institute, and the Japan Nuclear Energy Safety Organization. SKI Report 2008:1 describes the methods and techniques that are proposed for the derivation of piping reliability parameters...
Innehållstyp: Publikationer -
2012:43 Technical Note, Literature review of groundwater flow in permafrost
The Swedish Radiation Safety Authority (SSM) assigned the task of compiling the state of the knowledge with respect to groundwater flow in permafrost conditions. In particular, the study was to consider whether (i) the main processes related to groundwater flow in permafrost were understood, (ii) appropriate field data was available, and (iii) current models appropriately represent the...
Innehållstyp: Publikationer -
2012:49 Hydrogeological characteristics of sites for low- and intermediate-level waste disposal
The Forsmark area with its selected two sites and the Laxemar-Simpevarp area with its two sites are broadly similar in terms of lithology, rock ages, and tectonic histories. The two areas differ in terms of degree of deformation, and tectonic fabric. Some lithologic and tectonic differences are noticeable between the two sites in the Forsmark area and between the two sites in the...
Innehållstyp: Publikationer -
2012:08 Deterministic Assessment of Future Costs for Dismantling (FA)
In this study a model for advanced deterministic cost calculation has been used to find a parametric value on the cost for dismantling of the FA-facility. The study gives good description of good practise to collect, test and utilise input data in a systematic way in order to make prudent cost estimates for any particular nuclear installation The Swedish Law stipulates that future expenses...
Innehållstyp: Publikationer -
2012:70 Process Parameters Affecting Inhomogeneity of Material Microstructure
There’s been a tremendous change in the number, product types, locations, equipment, and manufacturing capabilities of stainless steel producers from the late 1960’s to present. This reconfiguration of the global steel industry occurred between the early 1970’s to the mid 1980’s and continues today. These changes have produced a loss in manufacturing flexibility, due to the inherent...
Innehållstyp: Publikationer -
2012:58 Technical Note, Independent radionuclide transport modelling – Reproducing results for main scenarios
As part of the initial technical review of SR-Site, we applied a simplified model to approximate Swedish Nuclear Fuel and Waste Management Company (SKB) computations related to the transport of radionuclides at the planned KBS–3 repository at the Forsmark site in Sweden. The objective was to provide insights and recommendations to the Swedish Radiation Safety Authority (SSM) on potential...
Innehållstyp: Publikationer -
2012:47 C-14 Long-Term Dose Assessment: Data Review, Scenario Development, and Model Comparison
BIOPROTA is an international collaboration forum which seeks to provide a transparent and traceable basis for the choices of parameter values, as well as for the wider interpretation of information used in assessments. Particular emphasis is placed on data required for the assessment of long-lived radionuclide migration and accumulation in the biosphere, and the associated radiological...
Innehållstyp: Publikationer -
2007:06 Probabilistic Safety Goals - Phase 1 -Status and Experiences in Sweden and Finland
Based on a series of interviews and on literature reviews as well as on a limited interna- tional over-view, the project has described the history and current status of safety goals in Sweden and Finland. A number of issues were discussed more in detail, including the status of the safety goals in view of the fact that they are often exceeded, strategies for handling violations of safety...
Innehållstyp: Publikationer -
2012:26 Technical Note, Initial review of chemical and erosional processes within the buffer and backfill - Chemical erosion processes
The SR-Site documentation relevant to this review topic was found to be of sufficiently high quality overall to justify further consideration in the Main Review Phase of SSM’s PCS (Post-closure safety) project. Several specific topics for which complementary information and clarifications should be requested from SKB were also identified (Appendix 2). Specific review topics for consideration...
Innehållstyp: Publikationer