Din avgränsning ger 740 träffar.
-
2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Innehållstyp: Publikationer -
2014:09 Further Development of the Core Simulator CORE SIM: Extension to coupled capabilities for BWRs
The developed tool is fully MatLab based and requires a set of input data from a commercial static core simulator. The driving perturbation can be specified both as a perturbation in thermo-hydraulic parameters or directly as a perturbation in macroscopic cross-sections. As output, the 3-dimensional spatial distribution of the noise in coolant density, pressure, enthalpy, inlet velocity, fuel...
Innehållstyp: Publikationer -
2014:01 Cost Estimating for Decommissioning Nuclear Reactors in Sweden
In Sweden, decommissioning cost estimates are core inputs to the process of calculating licensee contributions to the Swedish national fund for radioactive waste management and decommissioning. Under the present system, the decommissioning cost estimates are produced by licensees every three years and formally submitted to the Swedish Radiation Safety Authority (SSM), which reviews the...
Innehållstyp: Publikationer -
2013:10s Kvalificering av elkomponenter i kärnkraftverk - Hantering av åldring
Syftet med arbetet har varit att skapa ett underlag att användas vid planering av arbetet med miljökvalificering av framför allt komponenter i inneslutningen. Principerna är även tillämpbara utanför inneslutningen i områden som kommer att utsättas för ökad miljöpåkänning i samband med olika händelser. Rapporten är...
Innehållstyp: Publikationer -
2013:09 An Application of the Functional Resonance Analysis Method (FRAM) to Risk Assessment of Organisational Change
The objective of this study was to demonstrate an alternative approach to risk assessment of organisational changes, based on the principles of resilience engineering. The approach in question was the Functional Resonance Analysis Method (FRAM). Whereas established approaches focus on risks coming from failure or malfunctioning of components, alone or in combination, resilience engineering...
Innehållstyp: Publikationer -
2012:70 Process Parameters Affecting Inhomogeneity of Material Microstructure
There’s been a tremendous change in the number, product types, locations, equipment, and manufacturing capabilities of stainless steel producers from the late 1960’s to present. This reconfiguration of the global steel industry occurred between the early 1970’s to the mid 1980’s and continues today. These changes have produced a loss in manufacturing flexibility, due to the inherent...
Innehållstyp: Publikationer -
2012:50 Fatigue Margins for Austenitic Stainless Steels in ASME Boiler and Pressure Vessel Code – A Literature Study
Knowledge about the margins against fatigue failure in nuclear piping systems is essential. Therefore, the margins in the ASME Boiler and Pressure Vessel Code (section III) fatigue design procedure for austenitic steels, type 304/316, as applied to real components have been investigated in this literature study. It is concluded that the current knowledge about the margins in ASME for...
Innehållstyp: Publikationer -
2012:27 Mental arbetsbelastning En fallstudie från projektorganisationen på ett svenskt kärnkraftverk
Den genomförda studien har fokuserat på den personal som arbetar inom projektorganisationen och är en intervjustudie för att kartlägga den mentala arbetsbelastningen och de risker som finns relaterade till denna. Vidare har studien endast omfattat ett svenskt kärnkraftverk, som därmed får illustrera de faktorer som kan bidra och bidrar till den mentala arbetsbelastningen...
Innehållstyp: Publikationer -
2012:16 El och kontrollutrustning i kärnkraftverk. Problematik vid utbyte av åldrad utrustning
Studien visar på ett flertal områden som bör beaktas både hos tillståndshavarna och för framtida tillsynsstrategier för SSM. Flera av områdena har betydelse för säkerheten. Till exempel så framgår att konstruktionsprocessens efterlevnad och genomförande är mycket viktig för säkerheten. Genom att el- och kontrollutrustningen...
Innehållstyp: Publikationer -
2012:07 Implementation of the Master Curve method in ProSACC
Cleavage fracture toughness data display normally large amount of statistical scatter in the transition region. The cleavage toughness data in this region is specimen size-dependent, and should be treated statistically rather than deterministically. The Master Curve (MC) methodology is a procedure for mechanical testing and statistical analysis of fracture toughness of ferritic steels in the...
Innehållstyp: Publikationer