Din avgränsning ger 540 träffar.
-
2013:08 Licensing of safety critical software for nuclear reactors
– Common position of seven European nuclear regulators and authorised technical support organisations...
Innehållstyp: Publikationer -
2012:32 Technical Note, Groundwater Chemistry in SKB’s Safety Assessment SR-Site: Initial Review
This preliminary review of SR-Site is focused specifically on the treatment of groundwater chemistry in the description of the Forsmark site and in the long-term safety of a deep geological repository ... compositions of groundwaters have contributed to a site descriptive model (SDM) for Forsmark. In that SDM, groundwater chemistry is interpreted for several purposes. The main outputs are the description of present-day...
Innehållstyp: Publikationer -
2007:21 On tentative decommissioning cost analysis with specific authentic cost calculations with the application of the Omega code on a case linked to the Intermediate storage facility for spent fuel in Sweden
The aim of this applied study has been to demonstrate how a cost calculation is done in a systematic way. The framework of the project has been limited to older nuclear installations in Sweden. Furthermore ... envisaged that the process of making regular estimates of all the parameters is crucial in preparatory phases of decommissioning and dismantling processes. A secondary aim of the presented project has been...
Innehållstyp: Publikationer -
2007:22 Safety Management An Introduction to a Frame of Reference Exemplified with Case Studies from Non-Nuclear Contexts
A systems perspective has been applied on safety management that will be the foundation for the frame of reference the authors intend to build during the three-year long project. The case studies are presented ... presented and form illustrations of both high quality safety management and weaknesses of the safety management and take a look at information feedback about the risks of the systems. An organizational perspective...
Innehållstyp: Publikationer -
2009:15 Improvement and Validation of Weld Residual Stress Modelling Procedure
stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to ... for assessment of leak-before-break margins. Therefore, it is very important to have verified procedures to estimate weld residual stresses (WRS). During the latest years, there has been a strong development...
Innehållstyp: Publikationer -
2008:08 SSI:s independent consequence calculations in support of the regulatory review of the SR-Can safety assessment
With the publication of the SR-Can report at the end of 2006, Swedish Nuclear Fuel and Waste Management Co (SKB) have presented a complete assessment of long-term safety for a KBS-3 repository. The SR-Can ... SR-Can project demonstrates progress in SKB’s capabilities in respect of the methodology for assessment of long-term safety in support of a licence application for a final repository. According to SKB’s...
Innehållstyp: Publikationer -
2018:19 Licensing of safety critical software for nuclear reactors
Common position of international nuclear regulators and authorised technical support organisations – Revision 2018...
Innehållstyp: Publikationer -
2010:01 Licensing of safety critical softwarefor nuclear reactors
– Common position of seven European nuclear regulators and authorised technical support organisations...
Innehållstyp: Publikationer -
2012:53 Technical Note, Review of Engineering Geology and Rock Engineering aspects of the operation and closure of a KBS-3 repository at the Forsmark site – Initial Review Phase
Engineering Geology and Rock Engineering aspects of the operation and closure of a KBS-3 repository at the Forsmark site in Sweden. The review assignment is part of a Swedish Radiation Safety Authority (SSM) Initial ... behalf of SRK. Therefore some of the views expressed in the review report may not totally represent those of the company (SRK). In general SRK is satisfied with the efforts of SKB in dealing with the engineering...
Innehållstyp: Publikationer -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal ... removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and computational problems...
Innehållstyp: Publikationer