Din avgränsning ger 87 träffar.
-
2011:04 Evaluation of the Technical Basis for New Proposals of Fatigue Design of Nuclear Components
During the recent years fatigue analysis procedures for nuclear components have been investigated. The most common method so far has been the American code ASME III. The basis for the current design procedures in ASME III is quite old and has now been evaluated against modern data leading to the proposal of modified design curves. Also the effect of the environment has been the subject of...
Innehållstyp: Publikationer -
2011:30 A fatigue analysis including environmental effects for a pipe system in a Swedish BWR
The effect of the environment on fatigue design has been the subject of intense study in USA, Japan and elsewhere. Several reports indicate a potentially large influence of the environment, leading to the proposal of entirely new analysis procedures. SSM has in an earlier project sponsored research to evaluate the technical basis for these proposals, see SSM Research Report 2011:04. In the...
Innehållstyp: Publikationer -
2011:27 Riskanalyser inom extern strålbehandling
Strålsäkerhetsmyndigheten (SSM) arbetar pådrivande för att skydda människor och miljö från oönskade effekter av strålning. Inom sjukvård används strålning vid olika diagnostiska undersökningar och behandlingar. SSM verkar för att användningen av strålning inom sjukvård är säker för såväl...
Innehållstyp: Publikationer -
2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark
3825 kB...
Innehållstyp: Dokument -
2010:36 Guidance for the Definition and Application of Probabilistic Safety Criteria
3981 kB...
Innehållstyp: Dokument -
2011:10e Review and evaluation of the Swedish Nuclear Fuel and Waste Management Company’s RD&D Programme 2010. Statement to the Government and summary of the review report
838 kB...
Innehållstyp: Dokument -
2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden
In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...
Innehållstyp: Publikationer -
2011:01 Bestämning av kontamination med radium-226 i radonkalibreringsanläggningen i Malå- Beslutsunderlag inför sanering och avveckling av anläggningen
Radonkalibreringsanläggningen i Malå är kontaminerad med radium-226 (226Ra) som har läckt ut från de ursprungliga källorna. Saneringsåtgärder utfördes 1988, men aktivitet uppskattas finnas kvar på insidan av rörsystemet och på golvet i rummet. Eftersom anläggningen ska avvecklas är det viktigt att bestämma aktivitet i rörsystemet...
Innehållstyp: Publikationer -
2011:33 Mathematical modelling of ultrasonic testing of components with defects close to a non-planar surface
The report describes work that has been performed in order to model ultrasonic testing of components that contain a defect close to a non-planar surface. The studies have been performed in both 2D and 3D, and in 2D in both the anti-plane (SH) and the in-plane (P-SV). The results show that the presence of a non-planar back wall can reduce the detectability of defects close to the surface. The...
Innehållstyp: Publikationer -
2011:19 Experimental evaluation of influence from residual stresses on crack initiation and ductile crack growth at high primary loads
Cracked components are usually subjected to loads causing both primary and secondary stresses, e.g. welding components. Engineering assessment approaches, such as the ASME XI code and the R6 procedure, are commonly used to conduct integrity assessment of such components. There has been an ongoing debate how to treat secondary stresses using engineering assessment methods. The nature of these...
Innehållstyp: Publikationer
Gå till sida:
- Föregående sida
- Sida: 1
-
2 (nuvarande sida)
- Sida: 3
- Sida: 4
- Sida: 5
- Sida: 6
- Sida: 7
- Sida: 8
- Sida: 9
- Nästa sida